E Sentry ESC-MBH: Industrial Modbus Gateway for Remote Monitoring

The E Sentry Modbus Hub (ESC-MBH) is the system’s central gateway, securely aggregating real-time condition data from distributed E Sentry sensors and delivering it directly into SCADA/PLC environments for actionable monitoring, analysis, and reporting. Built for industrial reliability and easy deployment, it supports PoE and Modbus RTU over RS-485, simplifying integration into existing infrastructure while accelerating maintenance response. The result is smarter, faster, fully traceable inspections that improve visibility, reduce unplanned downtime, and strengthen asset reliability.

Made to handle real-world conditions

Robust housing, sealed interfaces, and stainless components resist heat, debris, and vibration in daily operations.

Bridges legacy Modbus assets into E Sentry

Supports RS-485 (RTU/ASCII) and Modbus TCP/IP, allowing traditional drives, meters, and protection devices to feed into the same condition-monitoring ecosystem as wireless sensors.

Get started with 1 hub gateway & 1 sensor. Low cost, easy to use.

Sensors require at least one hub gateway to function.

Bridge E Sentry Sensor Data into SCADA via Modbus

Supports Modbus RTU/ASCII over RS-485 and Modbus TCP over Ethernet, enabling integration with SCADA/PLC systems

Reliable Data Capture Even During Outages

The ESC-MBH’s local processing, backup battery (5–10 hours), and data buffering ensure insight continues even if facility networks briefly fail.

Dual-Power Flexibility

Sensors require at least one hub gateway to function.

GUI-Based Protocol Selection

A built-in GUI to switch between RS-485 and TCP/IP modes simplifies commissioning and reduces integration engineering hours.
IRISS

De fabricación estadounidense, de confianza mundial.

En IRISS, cada ventanilla de inspección se concibe, diseña y construye al 100% en suelo estadounidense, encarnando la innovación, la calidad y la coherencia que definen los valores fundamentales de la fabricación estadounidense. Nuestras profundas raíces en Estados Unidos reflejan nuestro compromiso con el ingenio, el trabajo duro y la excelencia, valores que resuenan tanto en los sindicatos como en las industrias. Aunque el orgullo “Made in the USA” está en el corazón de lo que hacemos, nuestra misión va mucho más allá. IRISS presta servicio a industrias de todo el mundo, proporcionando soluciones que dan prioridad a la seguridad, la sostenibilidad y la resistencia en un mundo interconectado. Desde nuestra fundación estadounidense hasta nuestro alcance global, nos dedicamos a crear un futuro más seguro y más fuerte para todos.

USA

Orgullosamente fabricado en Estados Unidos

General Specifications

Dimensions (H x W x D)266 mm x 181 mm x 102 mm (Including Antenna)
Weight527 g (1.16 lbs)
Operating Temperature0°C to 55°C (32°F to 131°F)
Operating Humidity5% to 85% RH (non-condensing)
Body MaterialUL 94 5VA Nylon (switchgear-grade plastic); -40°C (-40°F) to 273°C (523°F)
Hardware Material316 Stainless Steel
Ethernet Interface10/100 Mbit/sec

Power Specifications

Power over Ethernet (PoE)IEEE 802.3af compliant; 1500V isolated DC/DC converter; Input voltage range: 36V to 57V
Minimum Current Required100 mA @ 40V DC Input
Power over Modbus Connector9 to 20V
Minimum Current Required200 mA @ 12V DC Input
Backup Battery7.4V 2600mAh Li-Ion
Backup Battery Life5 – 10 Hours

Modbus Communication

RS-485 (RTU/ASCII)D+, D-, and Ground / Common
TCP/IPEthernet
Protocol SelectorGUI for RS485 and TCP/IP

Wireless Specifications

Wireless Antenna TypesTerminal-Mounted Omnidirectional Dipole Antenna
Frequency Bands2.4 GHz
Wireless Range2,000+ ft (610 m) (Line of Sight)
Wireless ProtocolsLong Range BLE
Wireless Transmission Power+20 dBm
SecurityAES-128 CTR, RSA-2048

Certifications

FCC IDX8WWT02C40C, X8WBT40N
IC4100A-WT02C40C, 4100A-BT40N

Other

Warranty12 Month Limited Warranty

Productos relacionados

IRISS Icon

Asistencia a veteranos

Programa de Asistencia a Veteranos

Este campo es un campo de validación y debe quedar sin cambios.
Nombre*
¿Cómo podemos ayudar?*
IRISS ISO

Kit de iniciación E Sentry

Kit de iniciación E Sentry

Este campo es un campo de validación y debe quedar sin cambios.
Nombre*
IRISS ISO

Demostración de E Sentry

Demostración de E Sentry - AMS

Este campo es un campo de validación y debe quedar sin cambios.
Nombre*
IRISS ISO

Pide un presupuesto

Pedir presupuesto

Este campo es un campo de validación y debe quedar sin cambios.
Nombre*
IRISS ISO

Programa tu visita IRISS

Programar una visita al centro

Este campo es un campo de validación y debe quedar sin cambios.
Nombre*