Iriss

Understanding the Cost of an Arc Flash Incident and the ROI of Prevention

November 20, 2025

In this article:

A single arc flash can cascade into skyrocketing medical, legal, operational, and reputational costs. This blog breaks down how those costs accumulate, what technologies can prevent incidents, and how to build a compelling return on investment narrative for stakeholders. We will share real IRISS deployments where mitigation investments paid off early.

Arc flash incidents are among the most destructive electrical events a facility can suffer. Temperatures can exceed 35,000 °F, molten metal, blast pressure, and intense light accompany the arc, leading to serious injury or fatality.

The financial fallout from an arc flash reaches far beyond the immediate damage. Direct costs typically include medical expenses—such as burn treatment, hospitalization, and long-term rehabilitation—along with workers’ compensation, insurance claims, and potential litigation. On the operational side, facilities face the expense of replacing or repairing electrical equipment, conducting investigations, paying regulatory fines, and covering the revenue lost from forced shutdowns. The cost of a single arc flash injury can range anywhere from $10,000 to $15 million, depending on system voltage and injury severity.

Yet those are only the visible expenses. Indirect costs ripple outward, amplifying the total financial impact. Production lines may go offline for days or weeks, delaying deliveries and triggering contract penalties. Damaged components and scrapped materials add further waste. Beyond the balance sheet, there’s reputational harm—customers and employees may lose confidence, and insurers may raise premiums or refuse renewals. When viewed through this lens, the cost of prevention is negligible compared to the compounded losses of even one serious incident. Preventing a single arc flash can yield an ROI that far exceeds most capital maintenance investments.

What Is the Cost of an Arc Flash Incident?

The cost of an arc flash incident includes the immediate emergency, the damage it causes, and the disruption that follows. Medical treatment and equipment replacement may be the most visible expenses, but the financial impact can continue long after the affected area has been secured.

A serious incident can generate losses reaching millions of dollars when injuries, prolonged shutdowns, equipment damage, and legal consequences occur together. However, there is no single cost that accurately represents every incident. Facility-specific consequences provide a more useful basis for planning than a broad industry estimate.

Organizations should consider three questions: Who could be harmed? What equipment and operations could be affected? How long would recovery take?

The human consequences remain the most important consideration. Financial analysis helps organizations compare improvements and allocate resources, but it cannot fully represent the effect of a serious injury on an employee and their family.

What Factors Influence the Cost of an Arc Flash Incident?

The total cost depends on the severity of the event and the facility’s ability to respond and recover.

Injury severity and the number of people exposed

An incident involving multiple employees can create extensive treatment, rehabilitation, absence, and compensation costs.

Electrical system characteristics

Arcing current, fault-clearing time, equipment configuration, and working distance influence the potential exposure. System voltage alone does not establish incident severity or financial consequences.

Equipment affected

Damage to a readily available component presents a different recovery challenge from damage to custom switchgear or a critical transformer.

Operational dependence

An incident affecting a single machine may have a limited production impact. Damage at a main distribution point can interrupt multiple processes or an entire facility.

Replacement lead times

Engineering, manufacturing, delivery, installation, and commissioning can extend an outage well beyond the initial cleanup.

Redundancy and recovery arrangements

Alternative power paths, available spares, and tested recovery plans can help limit disruption.

Legal, contractual, and insurance circumstances

Liability, policy exclusions, deductibles, and customer agreements influence how much of the loss the organization ultimately bears.

Direct Costs of an Arc Flash Incident

Direct costs are expenses that can be linked to the incident through treatment records, repair invoices, claims, and other documented charges.

These may include:

  • Medical treatment: Emergency transport, hospitalization, surgery, specialist care, and rehabilitation.
  • Employee compensation: Applicable wage replacement, disability benefits, and related claims.
  • Equipment repair or replacement: Damaged switchgear, conductors, protective devices, controls, and enclosures.
  • Emergency services and cleanup: Site stabilization, debris removal, and specialist cleaning.
  • Technical investigation: Engineering assessments, testing, and analysis of the failure.
  • Legal expenses: Representation, litigation, and settlements where applicable.
  • Regulatory penalties: Fines where an investigation identifies violations.
  • Restoration and commissioning: Installation, testing, and verification before equipment returns to service.

For financial modeling, identify who pays each expense. Medical treatment covered by an insurance claim should not also be counted as a separate employer payment unless the organization actually bears both costs.

Indirect Costs of an Arc Flash Incident

Indirect costs arise from the disruption surrounding the incident. They can be harder to identify because they appear across operating budgets and may accumulate over an extended period.

Lost production and service capacity

Equipment outages can prevent a facility from manufacturing products, processing orders, or delivering essential services.

Idle labor and recovery overtime

Employees may be unable to perform normal work during the shutdown. Additional shifts may then be needed to restore operations or recover delayed production.

Spoiled materials and interrupted processes

A sudden loss of power can damage work in progress, interrupt temperature-controlled processes, or require an entire production batch to be discarded.

Temporary operating arrangements

Rental equipment, temporary power, outsourced production, and expedited shipping can increase recovery costs.

Management and administrative time

Investigations, insurance coordination, customer communication, and revised work planning consume time that would otherwise support normal operations.

Workforce disruption

A serious incident can affect employee confidence, morale, retention, and the availability of experienced personnel.

Customer and insurance consequences

Delivery failures can strain customer relationships. Insurance premiums or coverage terms may also change, depending on the claim and insurer.

Cost classifications vary between organizations. The important requirement is to capture each consequence once and use consistent definitions.

Prevention Technologies: Engineering Safety Into Inspections

To mitigate arc flash risk, many facilities adopt technologies that reduce exposure or eliminate the need for opening energized panels. These include:

  • Infrared inspection windows (like IRISS CAP, VP, CAP-ENV) allow thermographic scanning through sealed panels, completely eliminating exposure during inspection.
  • Ultrasound ports / embedded sensors detect partial discharge, corona, tracking, and arc precursors inside equipment under load, enabling early interventions (IRISS designs its inspection ports and windows to support both infrared and ultrasound testing through the same access point, allowing teams to detect heat-related and electrical discharge issues simultaneously without opening energized panels.)  
  • Thermochromic overtemperature indicators (such as Safe-Connect) offer passive visual alerts when components exceed safe thresholds, giving maintenance teams early warning before potentially catastrophic failure.
  • Design strategies under the hierarchy of controls: Substituting open-panel work with safer inspection methods, isolating or guarding live parts, automating data collection, and relegating PPE use to last-resort measures.

These tools shift inspection from a hazardous, exposure-based task into a safer, continuous oversight model that pays dividends by preventing catastrophic costs.

How Preventing an Arc Flash Incident Delivers ROI

Investment in arc flash risk reduction can create value through lower expected losses and measurable improvements in routine work.

Measures that reduce the likelihood of an event help protect people and equipment. Other measures reduce employee exposure or limit the severity of an event if one occurs. These benefits should be assessed separately because they address different parts of the risk.

Inspection improvements can also generate recurring operational savings. For example, appropriately selected infrared windows can allow thermographic inspection without removing the main enclosure covers, reducing preparation and access work. The original article describes this connection between inspection access, labor savings, and risk reduction. IRISS

A credible business case distinguishes between:

  • Measured savings: Documented reductions in inspection labor, access time, or other operating expenses.
  • Estimated risk reduction: A supported estimate of how the investment changes expected incident losses.
  • Benefits that are difficult to price: Greater employee confidence, improved inspection consistency, and stronger operational resilience.

An incident-free year does not prove that a specific intervention prevented an arc flash. Financial claims should reflect what the organization can demonstrate.

Modeling ROI to Stakeholders

To persuade executives or finance teams, your ROI model should include:

  1. Baseline incident cost estimate
    Use industry data or internal loss history to estimate what one arc flash would cost your facility (medical + legal + downtime + repairs).
  2. Mitigation investment cost
    Include upfront installation (windows, sensors, ports, integration) plus training, software, and any maintenance overhead.
  3. Cost avoidance / benefit assumptions
    Estimate how many incidents you prevent (or how many days of downtime avoided). Factor in less PPE use, fewer emergency repairs, and improved reliability.
  4. Payback period / ROI calculation
    ROI = (Avoided Costs – Investment Cost) / Investment Cost over a defined period (e.g. 3–5 years). Show sensitivity (best case / worst case) to account for uncertainty.
  5. Intangible / strategic benefits
    • Improved safety culture and morale
    • Lower insurance premiums
    • Reputation protection
    • Competitive differentiation in safety performance

If your facility has past near-misses or minor incidents, use them as reference points to scale your model realistically.

How to Calculate the ROI of Arc Flash Prevention

Choose a defined evaluation period and compare the full investment cost with the benefits expected over that same period.

ROI (%) = [(Total estimated benefits − Total program costs) ÷ Total program costs] × 100

1. Establish the full program cost

Include engineering, equipment, installation, planned outages, training, software, inspections, and ongoing maintenance.

2. Measure routine operating savings

Compare the existing process with the proposed process. Record inspection frequency, employee hours, contractor charges, and access requirements.

3. Estimate the change in expected incident losses

For each credible incident scenario:

Expected annual loss = Estimated annual incident frequency × Estimated average loss per incident

Compare expected losses before and after the proposed controls. Account for changes in incident likelihood, exposure, and consequences without assuming that every control improves all three.

4. Calculate benefits over the evaluation period

Add routine savings and the estimated reduction in expected losses. Keep the two categories visible.

5. Test uncertainty

Use conservative, central, and higher-loss scenarios. Where there is no defensible basis for estimating incident frequency or control effectiveness, present a break-even analysis instead of inventing a prevention rate.

The following example is illustrative, not an industry benchmark:

Five-year calculationIllustrative amount
Total program cost$60,000
Documented annual operating savings$9,000
Assumed annual reduction in expected incident losses$6,000
Total five-year benefits$75,000
Net five-year benefit$15,000
Five-year ROI25%

This simple example excludes discounting and taxes. Its risk-reduction assumption would need supporting evidence before use in an investment proposal. Without that assumption, routine savings would total $45,000, leaving $15,000 to break even.

Required safety measures must still be implemented regardless of whether a financial model produces a positive return.

Case Studies of Arc Flash Mitigation by IRISS

Insurance Campus: Labor Savings + Risk Reduction

A major insurance company campus in Hartford, CT conducted an arc flash assessment and found incident energies exceeding 40 cal/cm². They installed 150 IRISS polymer infrared windows across substations and switchgear so inspections could be done in a closed, guarded state. The result: inspection teams no longer needed arc-rated suits or multiple electricians to open panels. Labor costs dropped by over 90%, and inspection frequency increased, demonstrating a clear ROI path from risk mitigation to cost savings. 

UK Automotive Plant: Post-Incident Prevention Strategy

After an arc flash event at a UK automotive facility that displaced a transformer cabinet, the plant adopted a layered mitigation approach. Infrared windows and ultrasound ports were installed to allow in-service inspections without opening energized panels. This change enabled safer and more frequent inspections, reduced exposure risk, and improved visibility into electrical system health, all of which transformed arc flash mitigation from reactive to proactive.

Best Practices for Reducing Arc Flash Costs

Prioritize the removal of hazardous exposure

Plan work around an electrically safe work condition wherever required. Identify recurring tasks that can be redesigned to reduce interaction with energized equipment.

Assess the task and the equipment

Consider the activity being performed, equipment condition, system configuration, and potential exposure. An equipment label alone does not address every task or operating circumstance.

Evaluate engineering improvements

Have qualified electrical professionals assess suitable protection, fault-clearing performance, remote operation, and inspection access arrangements.

Maintain equipment and protective devices

Inspection findings must lead to corrective action. Protective devices also need appropriate maintenance so they can perform their intended function.

Use condition monitoring with a defined response process

Infrared, ultrasound, and other suitable methods can identify certain developing defects. Assign responsibility for reviewing findings, prioritizing repairs, and verifying completion.

Design inspection access carefully

Windows and ports need appropriate selection, placement, installation, and compatibility with the enclosure. Their presence does not automatically establish arc containment or remove every hazard associated with the task.

Train personnel for their responsibilities

Training should address hazard recognition, task limits, procedures, protective equipment, and emergency arrangements. Verify understanding and practical competence.

Prepare for recovery

Maintain current equipment records, identify critical spares, and establish recovery arrangements. These measures support continuity if an incident occurs.

Key Takeaways

  • A single arc flash incident can cost millions when medical bills, downtime, legal, and reputational impacts are taken into account
  • Investing in engineered inspection access (IR windows, ultrasound, thermochromic devices) prevents risk exposure and supports continuous monitoring.
  • ROI models must include avoided costs, investment, and soft benefits such as safety culture and insurance reduction.

IRISS Leads the Way in Risk-Averse ROI Design

Ready to quantify the ROI of preventing an arc flash before it happens? Contact IRISS to model a mitigation strategy, combining inspection hardware, workflow systems, and financial justification all in one package, that’s tailored to your facility.

Frequently Asked Questions

These questions address incident costs, prevention measures, and common misunderstandings about arc flash hazards.

How much does an arc flash incident cost?

There is no universal cost. The total depends on injuries, equipment damage, downtime, recovery requirements, and legal consequences. A serious event can create multimillion-dollar losses, but organizations should estimate their own exposure using credible incident scenarios and facility-specific costs.

What are the direct and indirect costs associated with an arc flash incident?

Direct costs include treatment, compensation, equipment repairs, cleanup, investigation, and applicable legal expenses. Indirect costs include production losses, idle labor, recovery overtime, administrative time, customer disruption, and potential insurance changes.

The classification matters less than ensuring that the estimate includes all relevant costs without counting the same loss twice.

What factors influence the cost of an arc flash incident?

Major factors include injury severity, the number of people exposed, fault duration, equipment damage, operational criticality, and replacement lead times. Redundancy, spare equipment, insurance coverage, and recovery planning also affect the organization’s final financial loss.

Voltage alone is not a reliable measure of incident severity or cost.

Why are arc flash incidents so expensive?

One event can create several losses at the same time. An employee may require extensive care while damaged electrical equipment interrupts production and specialist teams investigate the cause.

Recovery can remain expensive after repairs begin because equipment procurement, testing, customer commitments, and employee absence may continue to affect operations.

How can organizations reduce the cost of an arc flash incident?

Organizations can reduce potential losses by addressing incident likelihood, employee exposure, and event severity. This includes appropriate de-energization, engineering controls, equipment maintenance, qualified personnel, and suitable protective measures.

Recovery planning, redundancy, and critical spares can help limit operational disruption. Insurance can transfer some financial losses, but it does not prevent injuries or restore lost operating time.

How do infrared inspections help prevent costly arc flash incidents?

Infrared inspections can reveal abnormal heating associated with conditions such as deteriorating connections, overloading, or component problems. Investigating and correcting these findings can address some conditions that contribute to electrical failures.

Infrared windows can support inspection with the main enclosure covers in place. However, thermography does not detect every arc flash precursor, and windows do not guarantee that an incident cannot occur. Inspection results must lead to appropriate corrective work.

Does OSHA require an arc flash risk assessment?

OSHA requires employers to assess workplace hazards and provide appropriate protection. In general industry, 29 CFR 1910.132(d) requires an assessment of hazards that necessitate PPE and written certification that the assessment was performed. This is not a blanket requirement to commission the same type of numerical arc flash study for every facility. 29 CFR 1910.132

For work covered by the electric power generation, transmission, and distribution standard, 1910.269(l)(8) explicitly requires assessment of electric arc exposure and a reasonable estimate of incident heat energy for exposed employees. NFPA 70E provides a widely used framework for arc flash risk assessment, but it should not be described as an OSHA regulation. 29 CFR 1910.269

What is the difference between an arc flash and an arc blast?

An arc flash is the intense release of heat and light associated with an electrical arc fault. An arc blast is the pressure effect produced by rapid heating and expansion during the event.

The same incident can involve both. Thermal exposure can cause severe burns, while pressure, flying debris, and intense sound can cause additional injuries.

How hot can an arc flash become?

Temperatures at the arc can reach approximately 35,000°F, or 19,400°C. This describes the temperature at the source, not the temperature experienced uniformly throughout the surrounding area. IRISS

Worker exposure depends on factors including distance, event duration, and equipment configuration. Arc flash protection decisions therefore consider incident energy at the working distance, rather than source temperature alone.

Can you survive an arc flash incident?

Yes, survival is possible, but an arc flash can cause fatal or permanently disabling injuries. Outcomes depend on the exposure, event duration, distance, protective measures, and speed of emergency care.

Survivors may face extensive treatment and rehabilitation. Appropriate arc-rated PPE can reduce thermal injury severity, but it does not guarantee survival or protect against every consequence of the event.

Related articles

What actually changes in the move from Industry 4.0 to 5.0, beyond more automation and more connectivity? This article answers that, from the comparison itself to what it means for condition monitoring, predictive maintenance, and the people doing the work.
In this article, we examine why industrial data quality matters for AI-powered maintenance, key dimensions of data quality,  common sensor and data management problems, and how bad data affects AI decisions. It ends with practical steps to improve data governance and quality control.
In this article: Discover how integrating sensors, assets, and maintenance teams on the shop floor can transform the way manufacturing facilities detect, track, and resolve equipment issues. We explore the benefits, challenges, and real-world impact of a connected shop floor, where timely information empowers better maintenance decisions and improves production outcomes.

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Iriss

Get a quote

This field is for validation purposes and should be left unchanged.
Name*
Iriss

Schedule your IRISS site visit

This field is for validation purposes and should be left unchanged.
Name*

Veterans Assistance

This field is for validation purposes and should be left unchanged.
Name*
How can we help?*
Iriss

E Sentry Starter Kit

This field is for validation purposes and should be left unchanged.
Name*
Iriss

E Sentry Demo

This field is for validation purposes and should be left unchanged.
Name*