Iriss

OGI Inspection for Hydrocarbon Gas Leak Detection 

April 16, 2025

In this article:

OGI isn’t just about pointing a camera and watching for smoke-like plumes. Effective OGI inspections require experienced professionals who understand the nuances of gas behavior, environmental factors, camera tuning, and documentation. That’s why many industrial facilities rely on third-party OGI services to get the job done right.

As fault detection tools evolve, so does the need to apply them wisely. Technologies like thermal cameras and acoustic imagers have reshaped preventive maintenance, but when it comes to detecting gas leaks—particularly hydrocarbons—no single tool fits all. 

Among modern tools, Acoustic Imaging and Optical Gas Imaging (OGI) stand out. Each excels in specific applications, and understanding their capabilities ensures safe, efficient, and compliant leak detection. 

OGI, in the hands of trained experts, is essential for detecting hydrocarbon leaks, while Acoustic Cameras remain the best fit for compressed air and other high-pressure gas applications. 

What Is an OGI Inspection?

An Optical Gas Imaging (OGI) inspection uses a specialized infrared camera to locate gas leaks that are normally invisible to the human eye. The camera makes certain escaping gases visible as moving plumes, helping inspectors identify the equipment or connection releasing them.

For facilities handling hydrocarbons, OGI provides a practical way to inspect valves, flanges, seals, tanks, and other potential leak sources. Inspections can often take place while equipment remains operational, allowing maintenance teams to investigate product loss and emissions without an inspection-related shutdown.

An OGI image shows where a detectable gas plume is present. It does not automatically identify the exact chemical or measure the leak rate. Quantitative Optical Gas Imaging (QOGI) requires additional capabilities and suitable operating conditions to estimate emissions.

How Does an OGI Inspection Work?

Gases absorb and emit infrared radiation at particular wavelengths. An OGI camera uses a detector and spectral filter matched to the gases of interest, creating an image that reveals the plume against its background. Visibility depends on factors including gas concentration, viewing distance, wind, and the temperature difference between the gas and background.

A trained inspector systematically scans equipment, adjusts focus and image settings, and examines suspected leaks from suitable viewpoints. This helps distinguish escaping gas from reflections, steam, or other visual interference.

Findings should connect each recorded plume to an identifiable asset or component. This gives maintenance teams a clear location to investigate, supports repair planning, and provides a reference for follow-up inspection.

Acoustic Cameras vs. OGI: Complementary, Not Competing

What Acoustic Cameras Do Best 

Acoustic cameras detect ultrasonic sound generated by leaks or faults. They’re perfect for: 

  • Detecting compressed air leaks 
  • Locating vacuum system leaks 
  • Identifying partial discharge or arcing 
  • Spotting mechanical faults (bearings, cavitating pumps) 

These tools are highly effective when there’s a distinct sound signature from a leak, such as in high-pressure air systems. They’re excellent for visualizing sound in real time across a wide area. 

However, their effectiveness depends on one thing—sound. If there’s no ultrasonic signal, there’s nothing to detect. 

Where Acoustic Cameras Struggle: Low-Pressure Hydrocarbons

In contrast to compressed air, many hydrocarbon leaks occur at low pressure—like small valve seepage or flange leaks. These often don’t produce enough acoustic turbulence to be picked up, especially in noisy industrial environments. 

Additionally, acoustic imaging can’t differentiate between air, steam, or hydrocarbon gas, leaving critical questions unanswered about safety or compliance. 

Why OGI is a Must for Hydrocarbon Leak Detection 

OGI visualizes gas based on how it absorbs infrared radiation, making even silent, invisible, low-pressure leaks visible. It’s ideal for detecting: 

  • Methane 
  • Propane 
  • Butane 
  • Benzene 
  • Ethylene 

Applications of OGI Inspection

OGI inspection is useful wherever facilities produce, process, transport, store, or use gases that the selected camera can detect. Common applications include:

  • Oil and gas production: Inspecting wellsite equipment, separators, valves, and associated connections for hydrocarbon releases.
  • Natural gas processing and compression: Locating leaks around compressors, seals, piping connections, and process equipment.
  • Refineries and petrochemical plants: Surveying equipment handling hydrocarbons and detectable volatile organic compounds.
  • Storage and transfer operations: Examining accessible tank fittings, vapor handling equipment, and transfer connections.
  • Biogas and landfill gas systems: Investigating methane releases from collection and handling equipment.
  • Electrical utilities and other industries: Using appropriately configured cameras to detect gases such as sulfur hexafluoride or ammonia.

The inspection scope should reflect the actual gases, equipment, and operating conditions at the facility. Findings become most useful when they lead to assigned corrective actions and verification that repairs have addressed the release.

Key Advantages of OGI Services 

  • Sees what sound can’t: Even quiet leaks at low pressure show up as infrared plumes. 
  • Unaffected by noise: Works in loud environments with no interference. 
  • Chemical-specific: Identifies type and volume of gas, aiding risk assessment. 
  • Non-contact & safe: Inspections from a distance, while systems stay live. 
  • Compliance-ready: Meets industry standards for LDAR and environmental safety. 

What Gases Can OGI Inspection Detect?

OGI cameras detect gases whose infrared absorption characteristics overlap with the camera’s spectral range. Depending on the model and configuration, detectable gases can include methane, propane, ethylene, ammonia, sulfur hexafluoride, and certain refrigerants. A camera configured for one group of gases may require different optics or an entirely different detector system for another group.

Camera selection must therefore start with the target gas. Confirm the manufacturer’s documented gas sensitivity and the conditions under which that performance applies.

A visible plume alone should not be treated as proof of a particular chemical’s identity. Process information or additional analysis may be needed to establish what is escaping. Likewise, the absence of a visible plume does not prove that equipment is leak-free.

When to Use What: A Practical Approach

Feature Acoustic Camera Optical Gas Imaging (OGI) 
Detects Compressed Air ✅ Yes ⚠️ Not optimal 
Detects Hydrocarbons ❌ No ✅ Yes 
Works in Noisy Areas ❌ Often unreliable ✅ Yes 
Identifies Gas Type ❌ No ✅ Yes 
Effective at Low Pressure ❌ No ✅ Yes 
Visual Confirmation ⚠️ Sound-based only ✅ True infrared imaging 
Compliance & LDAR ❌ No ✅ Yes 

OGI Inspection Best Practices

Reliable OGI results depend on inspection technique, suitable conditions, and clear follow-through.

  • Confirm gas compatibility. Check that the camera can detect the expected gases or process mixture.
  • Use trained inspectors. Operators need practical experience recognizing plumes and interpreting difficult scenes.
  • Check field conditions. Keep wind, viewing distance, and gas-to-background temperature contrast within the camera’s established operating limits.
  • Scan deliberately. Maintain focus, stabilize the image, and allow adequate observation time.
  • Document limitations. Record obstructed components, unsuitable conditions, and areas requiring another visit.

Give each finding an asset reference, supporting images or video, and a clear route into the maintenance process. Assign responsibility for repair and arrange follow-up verification.

OGI also belongs within the facility’s broader safety procedures. It does not replace personal gas monitoring, atmospheric testing, or emergency response arrangements. Where inspections support a regulated leak detection and repair program, confirm that the equipment, method, records, and inspection schedule meet the applicable requirements.

Conclusion: Right Tool + Right Expertise = Reliable Leak Detection 

Acoustic imaging is a powerful tool for detecting leaks in pressurized gas systems, compressed air lines, and electrical discharges. But when dealing with hydrocarbons, especially in low-pressure, flange, or valve leaks, only OGI can reveal the real risk. 

That’s why facilities should consider integrated inspection strategies—leveraging acoustic cameras for compressed air and OGI for hydrocarbon detection, delivered by trained professionals who understand the behavior of each gas and system. 

Let’s stop thinking either/or. The future of gas leak detection is both. 

 But when lives, assets, and compliance are on the line—OGI is non-negotiable. 

Frequently Asked Questions

What is an OGI inspection?

An OGI inspection is a survey using a specialized infrared camera to make certain gas leaks visible. Inspectors use the resulting images to locate escaping gas and document the affected equipment. It is commonly used to support hydrocarbon leak detection, maintenance planning, and emissions reduction.

What camera detects gas leaks?

An Optical Gas Imaging camera can visualize gases within its specified detection range. A standard thermal camera used for electrical or mechanical inspections should not be assumed to have this capability. Acoustic imaging cameras can also locate leaks that produce sufficient ultrasound, but they detect the sound of escaping gas rather than its infrared absorption.

What kind of detector detects gas leaks?

Gas leaks can be detected using portable gas monitors, fixed gas detectors, optical gas imaging cameras, and suitable ultrasonic instruments. The right choice depends on the gas, expected concentration, pressure, and inspection purpose. A device intended to warn workers about hazardous concentrations serves a different function from a camera used to locate a leaking component.

What is the easiest way to find a gas leak?

For a trained technician checking accessible connections, a suitable electronic leak detector may provide a straightforward method. OGI can make wider equipment surveys more efficient when the gas and viewing conditions are suitable. If you suspect an uncontrolled natural gas leak, leave the area and contact emergency responders from a safe location instead of trying to find the source yourself.

What are the four types of gas detectors?

There is no single universal classification limited to four types, but four common sensing technologies are catalytic bead, infrared, electrochemical, and semiconductor. Catalytic bead sensors detect combustible gases; infrared sensors detect compatible gases through infrared absorption; electrochemical sensors commonly measure specific toxic gases or oxygen; and semiconductor sensors respond through changes in electrical resistance. Other technologies include photoionization and ultrasonic detection.

What is an OGI sensor?

An OGI sensor is the infrared detector within an optical gas imaging system. It works with the camera’s optics, spectral filtering, and image processing to reveal compatible gases against a background. OGI systems may use cooled or uncooled detectors, depending on their design and application.

What sensor detects gas leakage?

The sensor must match the gas being monitored. Methane detection commonly uses suitable infrared, catalytic bead, or semiconductor sensors, while carbon monoxide and hydrogen sulfide monitoring often uses dedicated electrochemical sensors. Always verify the instrument’s target gases and measurement range. A carbon monoxide alarm should not be assumed to detect a natural gas leak.

How much does an OGI camera cost?

OGI camera pricing depends on the detector technology, target gases, lenses, hazardous-area approvals, and any quantification capabilities. Obtain a current quotation for the configuration your inspection requires, since a single headline price may exclude necessary accessories or software. Budget for operator training, servicing, and reporting as well. For occasional surveys, compare the total ownership cost with a professional inspection service.

What are the common problems with gas sensors?

Common problems include calibration drift, contamination, cross-sensitivity to other gases, blocked sampling paths, and aging sensing elements. Temperature and humidity can also affect performance. Some catalytic sensors can lose sensitivity through poisoning, while electrochemical sensors have a finite service life. Follow the manufacturer’s instructions for functional checks, calibration, maintenance, and replacement. For OGI systems, poor focus, dirty optics, and unsuitable viewing conditions can also cause missed detections.

What is the first thing you should do if you notice a natural gas leak?

Leave the affected area immediately and move to a safe location. Do not stop to locate or repair the leak, operate electrical switches, use a phone near the suspected release, or create flames or sparks. Once safely away, call 911 and the gas utility’s emergency number. At an industrial facility, follow the site’s evacuation and emergency notification procedures. Do not return until authorized responders confirm it is safe.

Related articles

A machine doesn’t have to break down before maintenance teams have reason to investigate. Changes in operating conditions may call for attention well before a failure occurs. Equipment health monitoring provides information that can guide condition-based maintenance decisions, potentially reducing unplanned downtime and repair costs while improving safety. Addressing problems as they develop may also help avoid the disruption of reactive repairs.
Electrical safety starts before PPE is selected. This blog explores how the hierarchy of controls, thoughtful maintenance planning, and infrared windows can help facilities reduce avoidable exposure during routine inspections. Learn how closed-panel inspection access and timely corrective action support a proactive approach to electrical risk reduction.
Electrical equipment rarely fails without some change in its condition. A connection begins running hotter than usual. A switchgear cabinet develops a faint buzzing sound. A breaker trips twice in one week after months of normal operation. Each may be an early indication of trouble. The difficulty is knowing which changes matter.

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Need help? Want more information?

No matter the size of your organization, we’ll work with you to create the perfect plan that aligns with your goals and budget. Explore how IRISS solutions can transform your operations by providing unparalleled features and benefits. Contact us today to get started with a personalized quote!

Iriss

Get a quote

This field is for validation purposes and should be left unchanged.
Name*
Iriss

Schedule your IRISS site visit

This field is for validation purposes and should be left unchanged.
Name*

Veterans Assistance

This field is for validation purposes and should be left unchanged.
Name*
How can we help?*
Iriss

E Sentry Starter Kit

This field is for validation purposes and should be left unchanged.
Name*
Iriss

E Sentry Demo

This field is for validation purposes and should be left unchanged.
Name*